burst pressure การใช้

• Hence, as tube diameters decrease, burst pressures increase.
• Mechanical properties of designed pipes such as collapse resistance, burst pressure, and axial tensile strength must be sufficient for the worst conditions.
• Microgroove s smaller diameter copper tubes have the strength to withstand the very high gas cooler and burst pressures of R744 while allowing for lower overall refrigerant volumes.
• This also allows some manufacturers to provide secondary pressure containment as an extra precaution for pressure equipment safety if the burst pressure of the primary pressure sensing diaphragm is exceeded.
• If the wall thickness of the part exceeds 1 / 4 inch, the leak pressure is typically on the same order of magnitude as the burst pressure of the part.
• In this way, the effective area of metal loss can be calculated and used in acknowledged formulas to predict the estimated burst pressure of the pipe due to the detected anomaly.
• This isn't to say that APCP cannot cause an explosion, but rather that the explosion would be caused by the pressure surpassing the burst pressure of the container ( rocket motor ).
• It may also be more convenient to use relative scales, because, with things like pneumatics and hydraulics, the amount of energy transferred is reduced by the relative " backpressure " of the atmosphere . ( e . g . : 15 psi of air in a tank at sea level will become 30 psi in the vacuum of space . ) Therefore, with measurements of things like blood pressure or tire pressure, a measurement relative to air pressure is a better indication of " burst pressure " ( damage threshold ) than an absolute scale.